DMT BRAND PILLAR & REDIAL DRILL MACHINE

Our Products

Techanical Specification	25 mm Pillar Drill	40 mm Pillar Drill
Drilling capacity in steel	25 mm	40 mm
No. of spindle speed	8	8
Spindle speed in RPM	105 - 2651 RPM	100 - 2000 RPM
Spindle nose	MT - 3	MT - 4
Spindle centre to column face	230 mm	320 mm
Spindle travel	160 mm	250 mm
Square table size	330 × 330 mm	381 × 381 mm
Maximum distance spindle to table	730 mm	-
Maximum distance spindle to base	1095 mm	-
Pillar Height from bas surface	1440mm	1397mm
Working surface of base	305 × 340 mm	-
Column diameter	90 mm	120 mm
Machine base	380 × 560 mm	-
Overall dimension	1465 × 740 ×400	-
V-belt section	B - 48	B - Section
Motor speed	1440 RPM	1440 RPM
Motor capacity	3 Phase 1HP capacity	3 Phase 1.5 HP capacity
Weight of machine	185 kg	375 kg
Type of Feed	Manual	Manual
No. of "T" Slots	2	2

Techanical Specification	25 mm Redial Drill	40 mm Redial Drill
Drill capacity	25 mm	40 mm
Pillar diameter	130 mm	165 mm
Spindle nose to table distance	650 mm	705 mm
Distance from spindle nose to base distance	860 mm	850 mm
Distance from spindle center to pillar surface	675 mm	850 mm
Minimum distance from spindle to pillar surface	385 mm	-
Taper in spindle	M.T. - 3	M.T. - 4
Number of speed	8 speed	8 speed
Range of speed (R.P.M)	125 to 2800	70 to 2000
Work table size (in mm)	310 × 208 × 208	305 × 305 × 400
Base size (machined area)	620 × 690	730 × 930
Overall base size	620 × 980	730 × 1290
Spindle travel	250 mm	255 mm
Pillar length from bas surface	1330 mm	1400 mm
Overall size	1650 × 1070 mm	1700 mm
Weight (Approx)	470 Kg	825 Kg
V-belt spindle	B-41	B-47
V-belt lifting	A-23	A-24
Type of Feed	Manual	Manual
No. of "T" Slots	3	3

Motor Pulley

Tapper Drift

Manual book